Choose a language


VIAFORM was developed by ADDCON NORDIC, a subsidiary of German based ADDCON GmbH. ADDCON GmbH is specialized in the development and production of sustainable product solutions for industry and agriculture. 

Production sites and central storage facilities for VIAFORM are located in Bitterfeld, Germany and Porsgrunn, Norway. Two production sites as well as a professional logistic network guarantee our customers quick, prompt and reliable deliveries – even under severe weather conditions.


To ensure that all products comply with highest requirements of our customers, ADDCON produces according to comprehensive quality standards. Both sites fully comply with the requirements of DIN EN ISO 9001:2008.

VIAFORM fully complies with French norm XP P 98-181.

Denmark & Norway:



• 50% potassium formate solution with environmentally friendly corrosion inhibitor

• clear, colour- and odourless liquid

• density: 1,35g/cm3

• freezing point: below -50° C



• 24 x 25 Litre canister

• 1.000 Litre IBC Container

• bulk (silo truck)


• granulated sodium formate with environmentally friendly corrosion inhibitor

• white, irregular shaped granular

• specific weight: 900 – 950 kg/m3 


• 10 kg bag

• 40 x 25 kg bags per pallet 

• 2 x 500 kg Big Bag per pallet


VIAFORM LIQUID and VIAFORM GRANULAR were tested regarding their material compatibility according to the regulations of SAE AMS 1435B and 1431C. Both products fully comply with all demanded requirements.

It is possible that surfaces treated with VIAFORM can be coated with traces of white dust coming from crystallizing organic salt after drying. This dust can be removed with water without leaving any residue.


VIAFORM can be used on the following surfaces*:



• Stainless steel

• Cadmium plated steel 

• Carbon steel

• Aluminium

• Copper

• Magnesium

• Titanium

Direct contact with galvanized materials should be avoided due to the corrosive effect of VIAFORM. The corrosion rate for galvanized steel is low with about 0,07 mg/cm2 per day (compared to NaCl: 0,2 mg/cm2 per day).


Surfaces and other materials

• Painted surfaces

• Bitumen

• Concrete

• Asphalt



• Polyethylene (PE)

• Soft polyethylene, low density (LDPE)

• Hard polyethylene, high density (HDPE)

• Polycarbonate

• Acrylic plastic

• Polypropylene (PP)

• Polytetrafluoroethylene, Teflon (PTFE) 

• Polyvinyl Chloride (PVC)

• Vulcanized Ethylene Propylene diene monomer (EPDM)

• Vulcanized Styrene-Butadiene Rubber (SBR)

• Acrylonitrile Butadiene Styren(ABS)

• Chloroprene rubber, Neoprene (CR) 

• Silicone rubber (MVQ)

• Epoxy resins (EP)

• Unsaturated polyester resins (UP)

• Butyl rubber

• Nitrile Butadiene Rubber (NBR) 

• Glass fibre reinforced polyester (high pH resistant)

• Polymethylmetacrylate (PMMA)

Fluorocarbon rubber (Viton) is not compatible with VIAFORM.

* SAE AMS 1435B and 1431C